Professional 34PCS 538RG 13MM FLEXIBLE GEAR R-ING WRENCH WITH GO-THROUNG SOCKET SET(13mm) Manufacturer

Why can’t the vacuum effect be maintained after using the vacuum sealer? The following are possible reasons. Users can check by themselves first.   1. The wrong material of packing bags: the material of plastic bags is PE, PP which can’t maintain the vacuum effect. The air will enter into the bags after the vacuum sealer finishing working. It is recommended to choose Nylon bags, Aluminum foil bags which can maintain the vacuum effect for a long time.   2. The sealing line is not sealed well: please check whether the sealing line is complete or not. If the sealing line is not closed, the air will run into the bags. (1) If the bag is too thick, and the vacuum sealer wasn't set for enough sealing time, the heat wasn't enough to seal the bag. If the vacuum sealer can adjust the sealing time, users can add more seconds to test whether the sealing is firm. If the vacuum sealer can't adjust the sealing time, users may need to replace the thinner bag or buy another vacuum sealer with setting sealing time function.     (2) There have also been cases where the bottom seal of the original bag was not sealed properly. In this case, seal the bottom sealing line again before vacuuming.   3.     Vacuum bag styles are not suitable for vacuum sealers: non-nozzle vacuum sealers can't be used for vacuum flat bags. Therefore, if you buy a non-nozzle vacuum sealer, you must pay attention to the style of the bag you use. This vacuum sealer is a must-to-use vacuum embossed bag or Nylon gusset vacuum bag. It is recommended that when purchasing a vacuum sealing machine or vacuum bag, it is more appropriate to confirm with the supplier first.     4.     The vacuum bag is broken: (1) If the package article has acute angles, be careful not to cut the vacuum bag when putting it into the vacuum bag. (2) Vacuum sealer in the process of pumping, when the bag is shrunk to the package, it may be punctured by the packaging.

Dear Sirs, By government guidelines on the Lunar New Year Festival, Daily Sealing will be closed for a vacation break from January 25 to February 02, 2025.  We are very grateful for your patronage and collaboration in the past year, and would like to take this wonderful opportunity to wish you  Happy New Year of The Snake Yours truly, Daily Sealing System Co., Ltd.  

  What is Impulse Sealer Heating Element?   A Heating Element is a key component in impulse sealers, which are devices used to seal plastic bags and other thermoplastic materials. Here are the main points about this element:   Function: The heating element generates heat when an electrical current passes through it, which melts the thermoplastic material to create a seal.   Material: The heating elements are typically made from a nichrome wire (an alloy of nickel and chromium) because of its high resistance to electricity and ability to withstand high temperatures without breaking down.   Operation: In impulse sealers, the heat is only generated when the sealer is in operation (i.e., when the handle is pressed down), which means the wire is only heated for short periods. This helps prevent the wire from overheating and extends its lifespan.   Replacement: Over time, the heating element can wear out due to repeated heating and cooling cycles. It may need to be replaced to maintain the sealer's effectiveness.   Installation: Replacing the heating element typically involves removing the old one, cleaning the sealing bar, and then carefully installing the new one to ensure it is taut and properly positioned.   This component is crucial for the proper functioning of impulse sealers, widely used in packaging industries to ensure seals.